LP-4812POE
- Product Code: LP-4812POE
- Description: The LAN-Power LP-4812POE is a Dual Voltage High Power PoE Splitter
- # of ports: --
- Input Power: PoE Min. 21 Watt use with LP-2535 or LP-2404
- Output Power: PoE Up to 10 Watts & 12vdc 1.0Amp
- Compliancy: IEE802.3af
Safety Approvals
- FCC
- CE
Prduct Description
The LAN-Power LP-4812POE is a Dual Voltage High Power PoE Splitter. Most IP Network End Devices available are PoE Enabled which allows them to be powered on the same LAN Data Cable (CAT 5 or higher) which provides Data transmission. The LP-4812POE is designed for applications where the requirement is for a PoE enabled IP End Device to be provided with PoE power along with a complimentary, standard 12 Volt DC device (such as an IR Illuminator, Access Control Lock, Camera Housing Heater and/or Fan, etc) to be provided with standard 12VDC power.
Environmental Specifications
- Operating Temperature: 32° to 104°F / 0° to 40°C
- Non-Operating Temperature: -4° to 149°F / -20° to 65°C
- Relative HumidityOrdering Information: 5% to 90%
Ethernet Data Throughput Speeds
- 10 Mbs Ethernet and 100 Mbs Fast Ethernet and
- 1000 Mbs Fast Ethernet (Gigabit Compatible)
Connector Types:
- PoE Input and PoE Output: RJ45 meets EIA 568A and 568B Standards
- 12VDC Output: 2 Wire
Electrical Specifications and Properties
- Power Input: 45-57 VDC 1.25A - Minimum 65
- Watts (LP-2575 Compatible)
DC Power Output:
- PoE OUTPUT: 10 Watts (0.21A) @ 42.5-57Vdc
- Voltage OUTPUT: 12Vdc 1.0A (12 Watts)
- Ripple: 120mV maximum at 25°C
- Efficiency: 75% minimum at maximum load (48V)
Unit Demensions
- Length: 3 7/8” (100mm)
- Width: 2 1/5” (56mm)
- Height: 1 1/10” (28mm)
- Weight: 0.31 Lbs (0.14 Kg)