Modular Midspan Power over Ethernet Chassis
and Modules easily bring IEEE802.3af compliant power for new
installations of IP Network Surveillance Cameras, Access Control
Security Devices and many other Emerging Products.
Press image "Play" controls
to view Modularity
|
|
|
1
slot PoE Chassis
& 4 Port HW Module
|
3
slot PoE Chassis
& 8 Port Modules
|
The 1 Slot and 3 Slot PoE Chassis and Modules support powering
applications in which AC power is difficult or costly to access,
such as VoIP Phones, Wireless LAN Access Points, Internet Security
Cameras, or other Emerging Network devices. Use with Legacy
non-powered Ethernet Switches.
The Chassis and Modules act as a patch panel and add ~48
VDC to unused (non-data) wires in a standard Category 5, 5e,
or 6 Ethernet Cable. The unit delivers both data and power
over a single standard Ethernet Cable to an End device designed
to receive both Data and Power through its RJ45 connector.
Key Features of the PoE Chassis and Modules include:
- Extremely cost effective vs. traditional powering techniques
- Exceeds IEEE 802.3af Power over Ethernet Standards
- Supports Data links at 10Mbs, 100Mbs or 1000Mbs
- 8 Port Module provides output wattage up to 18 Watts on
all ports simultaneously as needed
- 4 Port High Wattage Module provides output wattage up
to 36 Watts on all ports simultaneously as needed
- Full Port Power on all Ports means no need for cumbersome
"Power Management" Software required on many other
PoE Brands.
- Chassis allows for Hot-Swapping of Modules, drastically
reducing repair times and costs
- Use any Module or Module Combination in either Chassis
- Over Voltage current and Short Circuit protected and all
ports micro-fused
- Removable Power Cord w/IEC-320-C13 connector
- LED indicators show powering status
- Full 2 Year Product Warranty
Get PoE Chassis
and Modules Features for more information
Get
DataSheet for more information
|
