All LAN Power PoE products exceed the IEEE802.3af PoE Standard.
Product
Ordering
Number |
PoE
Product Reference Name |
Product Descriptions
|
LP2403
|
3 slot PoE Chassis
|
3 slot Chassis.
Holds up to three modules. Accepts 90-264 volt autoranging
power input. Chassis is 1U height. Uses removable power
cord w/ IEC-320 C13 connector. Powers up to 24 End devices.
Comes with rack mount ears installed for mounting in a
19" Rack. 3 slot Chassis may be used with one, two
or three 8 Port modules or 4 Port HW modules or any combination
of module types. Modules sold seperately. Ships with removable
North American power cord. |
| LP2403-08 |
3 slot PoE
Chassis
|
with one
8 port Module and two Cover Plates installed |
| LP2403-16 |
3 slot PoE
Chassis
|
with two
8 port Modules and one Cover Plate installed |
| LP2403-24 |
3 slot PoE
Chassis
|
with three
8 port Modules installed |
| LP2401 |
1 slot PoE Chassis
Rack mount Kit included
|
1 slot Chassis. Holds one module. Accepts 90-264 volt
autoranging power input. Chassis is 1U height. Uses
removable power cord w/IEC-320 C13 connector. Powers
up to 8 End devices. Shelf mount or use Rack mount Kit
included for mounting in a 19" Rack. 1 slot Chassis
may use one 8 Port module or 4 Port HW module. Modules
sold seperately. Ships with removable North American
power cord.
Rack mount Kit for LP2401 Chassis, fits standard 19"
Rack.
|
| LP2401-08 |
1 slot PoE Chassis
|
with one 8 port Module
installed |
| LP2408 |
8 Port Module
|
8 Port Module,
fits 1 or 3 slot Chassis. All Ports allow 10Mbs, 100Mbs
or 1000Mbs Ethernet connections, provides up to 18 watts
for all 8 module Ports simultaneously. Power up to 8 devices.
Modules are Hot Swappable out of or into any Chassis. |
| LP2404 |
4 Port HW
Module
|
4 Port HW
Module, fits 1 or 3 slot Chassis. All Ports allow 10Mbs,
100Mbs or 1000Mbs Ethernet connections, provides up to
36 watts for all 4 module Ports simultaneously. Power
up to 4 devices. Modules are Hot Swappable out of or into
any Chassis. |
| LP2411 |
Cover Plate
|
1 slot Cover
plate, use to cover unused Chassis slots. |
| LP2521 |
Single Port High
Watt PoE Injector
|
1 Port Power
Injector. For powering a single End device, provides up
to 28 watts continuously. Supports 10Mbs, 100Mbs or 1000Mbs
Ethernet connections. Comes with wall mount bracket. Has
90 to 264 volt autoranging power input. Ships with removable
North American power cord w/ IEC-320 C7 connector. |
PoE Voltage Adapters
|
PoE Voltage
Adapters - for use with End Devices not ready for IEEE
(48v) PoE - Converts IEEE 48 volt input to either 5 volt,
12 volt or 24 volt output depending on model selected.
Input may be from either IEEE 802.3af PoE Midspan Power
Hub or Injector, OR IEEE 802.3af enabled PoE Ethernet
Switch. Install Adapter at End device to be powered. |
| LP4805 |
Volt.
Adapter 5v |
PoE Voltage
Adapter with 5 volts output |
| LP4812 |
Volt.
Adapter 12v |
PoE Voltage
Adapter with 12 volts output |
| LP4824 |
Volt.
Adapter 24v |
PoE Voltage
Adapter with 24 volts output |
| Power
Connection Cables for PoE Voltage Adapters to End device |
Purchase
one Power Connection Cable and one 12" Data Connection
Cable with each Voltage Adapter purchased
|
| LP4851 |
Power
Cable - 2.5
|
12 inch
Power Cable with 2.5mm center pin connection |
| LP4852 |
Power
Cable - 2.1
|
12 inch
Power Cable with 2.1mm center pin connection |
| LP4853 |
Power
Cable -1.3
|
12 inch
Power Cable with 1.3mm center pin connection |
| LP4854 |
Power
Cable -2B
|
12 inch
Power Cable with 2 bare wires (for screw terminals) |
| Data Connection
Cable for PoE Voltage Adapters to End device |
|
| LP4865 |
Data
Cable - 12"
|
12 inch
Cat 5e Patch Cables, male RJ45 connectors w/ gold plated
pins and molded boots. UL and ETL Certified 350MHZ Cable,
in Black only |
| Data Connection
Cables for Patching from Ethernet Switch ports to PoE
Power Hub or PoE Injector ports and /or to Patch Panels |
|
|
LP4868-BL
and
LP4868-GR
|
Data
Cable - 12"
 |
12 inch Cat 5e Patch Cables, male RJ45 connectors w/
gold plated pins and molded boots. UL and ETL Certified
350MHZ Cable available in Blue or Gray.
Blue Cable is LP4868-BL.
Gray Cable is LP4868-GR.
|
| |
All LAN Power
Systems Products are covered by a 2 year product Warranty.
See website (www.lan-power.com)
for full details of coverage. LAN Power Systems reserves
the right to make changes to product features or pricing
as market conditions require. All Products are built using
ISO9002 Quality Specifications.
Questions? Write to sales@lan-power.com
or support@lan-power.com
and we will promptly assist you.
|
