Most Electronic Security and Access Control devices such as access card or security badge readers have traditionally powered either on 110v AC or 12v or 5v DC. This is the next large Market Segment of products which has begun to ready itself for PoE technology. Manufacturers in this product area are not overlooking the fact that having their products PoE ready is a huge feature advantage over other Manufacturers whose Security products are not. All these Security and Access Control devices which were once stand-alone are now becoming part of the Network. And being PoE ready is just the next evolutionary step in their feature development. The Diagram below shows the connectivity of the necessary components.

As with IP Security Cameras, IP Security and Access Control devices with PoE technology features will allow for installation almost anywhere. No more concerns with AC power outlet availability either for direct plug in to 110v or for step down adapters providing 12v or 5v DC. The same LAN Data Cable connection which allows the Network to monitor each Security transaction from the unit can now deliver the power needed for each unit as well. PoE Midspans will capture the majority of this powering market with their flexible Port counts and ability to adapt to non-standard voltage requirements. Single Port PoE Injectors and workgroup sized PoE Hubs will be the most suited for this emerging application. As with other PoE applications, 100% uptime can be assured by matching the PoE Hub to a UPS system. Secure, reliable centralized power for the Access Control Network will be provided with Midspan PoE Hubs at a fraction of the cost of competing technologies.

Benefits for Security and Access Control Networks

• Save 50 to 80% over the cost of traditional power outlet placement or low voltage wiring with PoE Midspans and LAN Data Cable instead.
• Be able to afford more Access Control devices because of reduced installation budget
• Additional $$ savings by not replacing Ethernet Switches or Cable plant
• LAN Power's PoE Midspans provide cost effective power back-up along with a UPS system
• The PowerUp Midspan may be placed in any convenient location along the LAN Data link between the Ethernet Switch and Access Control device needing to be powered