|
Emerging IP Product Applications
Many new products have appeared in the Marketplace which
are ready for powering with PoE Technology. Manufacturers
are realizing that "PoE Ready" is a selling feature
that differentiates their product from others not ready for
PoE powering. A PoE Ready product costs less for the End User
to install therefore it holds more value than a similar product
which is not PoE ready. The Diagram below shows how LAN Power's
Midspan PoE Hubs can provide power for some of the many new
PoE enabled End devices available in the marketplace today.
Here are some of the new products in the marketplace which
are ready now for PoE. A Flat Panel Touchscreen PC designed
for Public access locations. A Ceiling Speaker for paging
and music systems that's both VoIP and PoE ready. DMX 512
Lighting Controllers for the Concert and Entertainment sectors.
Compact 4 Port wall outlet sized Ethernet Switches. IP enabled
Digital Wall Clocks. IP enabled Intercom Systems. Gas leak
detection and monitoring stations. MPEG 2 Encoding units.
Serial to Ethernet Protocol Converters. VoIP Video Viewing
Stations. PC Daughter Board based Routing Platforms. And more
PoE Ready products coming all the time.
All these products add value for their End Users due to now
lower installation costs. Not only are they part of the Network,
they can be now backed up with a UPS system to insure continuous
operation in the event of a temporary building power failure.
Secure, reliable centralized Power over Ethernet for Emerging
Products provided by LAN Power Midspan PoE Hubs at a fraction
of the cost of competing technologies.
Benefits for Emerging IP Product Networks
- Save 50 to 80% over the cost of traditional power outlet
placement or low voltage wiring with PoE Midspans and LAN
Data Cable instead.
- Be able to afford more End devices because of reduced
cost for installation budget
- Additional $$ savings by not replacing Ethernet Switches
or Cable plant
- LAN Power's PoE Midspans provide cost effective power
back-up along with a UPS system to insure 100% uptime
- The PowerUp PoE Midspan may be placed in any convenient
location along the LAN Data link between the Ethernet Switch
and End device needing to be powered
|
